Vandalproof and Waterproof IP66
Desinged for indoor and outdoor, durable IP66 Metal housing and braket
Monitor Day&Night
2.8mm wide-angle lens optional
Motion Detection & Alarm Alert
When detect motion,the camera can push alarm message to APP or send photo to your email.Then you can check the details timely
Camera Features:
– Support AP connection
– Supports Both Wi-Fi and wired connectivity
– Supports micro SD cards up to 128GB (not included)
– Supports ONVIF, works with third-party NVR
– Supports mobile video surveillance (iOS, Android) via Yoosee
– Motion Detection & Email Alert functions
Specifications:
Video Compression : H.264
Sensor : 2MP CMOS /1.0 CMOS Sensor Optional
Video Resolution : 1920*1080P/1280*720P Optional
adjustable ;support frame rate from 1 to 30 frames/sec adjustable
Lens :2.8mm/3.6mm/6mm/8mm optional
IR Cut Filter : Yes
Wireless : wifi 802.11b/g/n
Motion Detect & Email Alert : Supports
Connector :1PCS LAN Port,1PCS Power Connector,1PCS Reset Button
Mobile Monitoring : Support IOS & Android With APP Yoosee
IR LED : 15pcs IR LED With 25Meters IR Distance
Woring Temperature : -20 to 60 degree
Power : 12V 1A-2A
TF Card Slot : Support ( Max 128Gb TF Card )
Housing material:Metal
Package contents:
1 x WIFI camera
1 x Use Manual
1 x Waterproof cap of cable
3 x Wall plug and screws
(Power supply and Micro SD Card optional)
Important notices:
1 .SD Card NOT included
2. To install a Micro SD card, open the camera and look for the SD card slot on back of the camera board
3. If repairs are required, contact the seller for instructions
3. This camera does not support website browsers such as IE, Chrome
4. This camera does not cloud viewing and saving information
5. Recording time depends on the SD Card being used. Check the recording times below for reference :
16Gb: 4-5days
32Gb :8-10days
64Gb:18-20days
128Gb:28-30days
6. 5G Network WI
Getting the “Yoosee” app:
1) iOS: download and install “Yoosee” from the Apple App Store
2) Android: Go to” yoosee.co” to download and install the app
3) Go to “yoosee.co” on your PC and download the required version of the app., Scan the QR core with your phone to download the software on your phone, or click on CMS to download the app to your computer.
Warm tips: Before setting the camera, please press the “reset button” 7 seconds to factory reset.
Setup in wired Mode
(connect DC12V and RJ45):
1) Warm tips: Before setting the camera, please press the “reset button” 7 seconds to factory reset.
2)When the camera is powered on, connect the camera a router (make sure to the router’s DHCP functions).
3) Open the Yoosee app and click the“+”in the top right corner. Select “Add new device- wired connection.”The router will discover the camera. Next, choose “New device” and enter the password “123” and the settings should be complete.
How to turn Wired to Wifi mode:
3,PC viewing by CMS client
Download CMS Client from this link:
(Please turn off the computer firewall before use)
1.This wifi camera also support PC viewing, but only support Windows system.
2.After you configure the camera successfully on Yoosee app , open the CMS client software on computer .
3.The CMS client will detect the camera, but this camera doesn’t support website browser viewing.
